ADM Scope Rings

AD-DELTA-R-L-30
AD-DELTA-R-M-30
AD-DELTA-R-MH-30
AD-DELTA-R-H-30
AD-DELTA-R-L-34
AD-DELTA-R-M-34
AD-DELTA-R-MH-34
AD-DELTA-R_lifestyle_1
AD-DELTA-R_lifestyle_2
AD-DELTA-R_LUG
AD-DELTA-R with DRC
AD-DELTA-R-L-30
AD-DELTA-R-L-30
AD-DELTA-R-M-30
AD-DELTA-R-MH-30
AD-DELTA-R-H-30
AD-DELTA-R-L-34
AD-DELTA-R-M-34
AD-DELTA-R-MH-34
AD-DELTA-R_lifestyle_1
AD-DELTA-R_lifestyle_2
AD-DELTA-R_LUG
AD-DELTA-R with DRC
Bundle Items:
+ Picture of Delta Scope Mount Ring Cap-Red Dot/ Picatinny Direct Mount Add one Delta Scope Mount Ring Cap-Red Dot/ Picatinny Direct Mount $120.00

ADM Scope Rings

ADM Scope Rings are precision-machined for bolt-action rifles with Picatinny rails. Available in 30mm and 34mm sizes with multiple centerline heights, these non-QD rings deliver rock-solid stability, durability, and accuracy.
*
*
$195.00
Fast Delivery Fast Shipping
Made in USA Made In USA

ADM Scope Rings

American Defense Manufacturing is proud to introduce our new line of ADM Scope Rings, designed specifically for bolt-action rifles. Engineered for precision and durability, these rings mount directly to any Picatinny rail and provide a rock-solid, non-QD solution for securing your optic.

Available in both 30mm and 34mm tube sizes, ADM Scope Rings are offered in a wide range of centerline heights (0.825", 0.885", 0.915", 0.975", 1.0", 1.1", 1.125", and 1.127") to give shooters maximum flexibility in configuring their rifle for proper eye alignment and scope clearance.

Machined from high-strength aluminum and finished with a Mil-Spec hard coat anodize, these rings are built to withstand recoil, field abuse, and demanding conditions—all while keeping your scope precisely in place. The square crossbolt has a greater contact surface on the receiver rail for strength and stability. The rings have an integrated recoil lug to further enhance reliability.

Key Features

  • Designed for bolt-action rifles with Picatinny rails
  • Available in 30mm and 34mm tube sizes
  • Offered in multiple centerline heights for perfect fit and comfort
  • Non-QD design
  • CNC-machined aluminum construction with Mil-Spec hard coat anodize finish
  • Built for durability and precision
  • Compatible with Delta Ring Caps (DRC)

Centerline Height Chart

Model Ring Size Height
AD-DELTA-R-L-30 30mm 0.825"
AD-DELTA-R-M-30 30mm 0.885"
AD-DELTA-R-MH-30 30mm 1.000"
AD-DELTA-R-H-30 30mm 1.125"
AD-DELTA-R-L-34 34mm 0.915"
AD-DELTA-R-M-34 34mm 0.975"
AD-DELTA-R-MH-34 34mm 1.100"
AD-DELTA-R-H-34 34mm 1.1275"

Available Ring Sizes and Heights

  • Ring Size: 30mm - Height: 0.825"
  • Ring Size: 30mm - Height: 0.885"
  • Ring Size: 30mm - Height: 1.0"
  • Ring Size: 30mm - Height: 1.125"
  • Ring Size: 34mm - Height: 0.915"
  • Ring Size: 34mm - Height: 0.975"
  • Ring Size: 34mm - Height: 1.1"
  • Ring Size: 34mm - Height: 1.1275"
Related products
Picture of Delta Scope Mount Ring Cap-Red Dot/ Picatinny Direct Mount

Delta Scope Mount Ring Cap-Red Dot/ Picatinny Direct Mount

$120.00
Be the first to review this product

Begin by removing the ring caps and placing the rings on the rifle in your desired location. Next, place the scope in the rings and check for eye relief. We recommend placing the rings as centered on the available scope tube in front of and behind the turret section on the scope.

Once the rings are in the correct location, remove the scope, then tighten each ring by pushing forward on the 1/2" nut and turning until finger tight. Next, use a torque wrench to tighten each nut to 65 INCH-POUNDS. DO NOT TIGHTEN IN FOOT-POUNDS.

If you do not have a torque wrench, use a 1/2" wrench to turn the nut a quarter turn (90°) past finger tight.

Finally, place the scope back in the rings and secure the caps by installing all screws loosely. Then, holding the short end of the 9/64" Allen key, tighten as much as you can. Check to make sure gaps on both sides of the rings are equal.

Please use the optic manufacturer suggested torque specs (general industry standard18–25 inch-pounds). The use of Loctite will result in our warranty being void. Suggested treadlocker is VC3 Vibra-Tite

FFL Terms and Conditions - Any items placed on the same order as a firearm/lower receiver will also be shipped to the FFL. If you would like additional items shipped to you directly, please place them on a separate order. To expedite your order, please have your dealer fax or email their FFL to us. If the dealer you are using to transfer a firearm has not sent us a currently updated FFL to put on file, there will be an extended period of time needed to process your order. Due to the high volume of orders, please allow up to two weeks for delivery of firearms. Email: [email protected].

Customers who bought this item also bought
NEW Picture of QD Universal Bipod base for Picatinny and ARCA

QD Universal Bipod base for Picatinny and ARCA

$120.00
Picture of Picatinny Harris Swivel Bipod Mount

Picatinny Harris Swivel Bipod Mount

$135.00
Picture of Rail Mount Hand Stop Mod 3

Rail Mount Hand Stop Mod 3

$60.00 $20.00